Filter
Top Products
21
Set up
Preparations
Optical digital input setting 2
Sets the input component to be assigned to optical input jack 2.
• Initial setting is “CD-R”.
Press % or fi to select the optical digital input 2
(DVD, TV, CD, CD-R, VCR, or OFF).
After you assign the component to a digital jack, like optical one,
whenever you select that component, for example CD, the receiver will
automatically change to the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the receiver.
Optical digital input setting 1
Sets the input component to be assigned to the optical input jack 1.
• Initial setting is “CD”.
Press % or fi to select the optical digital input 1
(DVD, TV, CD, CD-R, VCR, or OFF).
After you assign the component to a digital jack, like optical one,
whenever you select that component, for example CD, the receiver will
automatically change to the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the receiver.
dB
memo
dB
memo