Filter
Top Products
5
Operations on the Receiver and Cable Connections
To display reverberation characteristics measured with the receiver on your PC, you need to connect the
receiver to the PC.
1 Connect the receiver to your PC with a RS-232C cable.
Caution
Before making or changing connections, switch off the power and disconnect the power cord from
the power outlet. Plugging in components should be the last connection you make with your system.
VSX-91TXH /
VSX-9120TXH
M
U
LTI
J
O
G
MASTER
VOLUME
VSX
-
91TXH
PHONES
DVR 1/DVR 2VIDEO/GAME CD
CD
-
R/TAPE/MD
FM/AM
SYSTEM
SETUP
TUNING/
STATION
TUNER
EDIT
SPEAKERSRETURNTONE
MULTI JOG
MULTI CH
IN
SB ch
PROCESSING
SIGNAL
SELECT
SIRIUSXM HDMIiPod
MCACC
SETUP MIC
DIGITAL INAUDIORLVIDEO
VIDEO/GAME
INPUT
S
-
VIDEO
O
N/
O
F
F
Notes
• The type of cable to use is a female-female cross cable. Different manufacturers use different names
to refer to this type of cable. Sometimes it is called an “interlink” cable, and sometimes it is called a
“reverse” cable.
Pin-out diagram of RS-232C cable to connect receiver and PC
• The following cable has been proved to ensure system operation.
Dsub 9-pin female Dsub 9-pin female Dsub 9-pin female Dsub 9-pin female
Brand Cable Part NO.
Belkin Pro Series Serial Direct Cable-10 feet F3B207-10