Filter
Top Products
1
1
Chapter
9
4
61
9
Controls and displays
Front panel
1
INPUT SELECTOR
dial
Selects an input source (page 28).
2
SPEAKERS
See Switching the speaker terminal on page 18.
The Speaker System setting may or may not be displayed,
depending on the input source you have selected.
3
MCACC indicator
Lights when Acoustic Calibration EQ (page 38) is on (Acoustic
Calibration EQ is automatically set to on after the Auto
MCACC setup (page 26
)).
4
ZONE controls (VSX-1024 only)
If you’ve made MULTI-ZONE connections (see Making MULTI-
ZONE connections on page 58) use these controls to control
the sub zone from the main zone (see Using the MULTI-ZONE
controls on page 58).
Receiver control buttons (VSX-824 only)
DIMMER
– Dims or brightens the display. The brightness
can be controlled in four steps.
STATUS
– Switches the display of this unit. The listening
mode, input format, sound volume, input name can be
checked by selecting an input source.
The Input format may or may not be displayed, depending
on the input source you have selected.
5
Character display
See Display on page 10.
6
Tuner control buttons
BAND
– Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 36
).
TUNER EDIT
– Use with
TUNE
/
,
PRESET
/
and
ENTER
to memorize and name stations for recall
(page 36
).
TUNE
/
– Used to find radio frequencies (page 36).
PRESET
/
– Use to select preset radio stations
(page 36
).
7
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (page 20
).
8
iPod iPhone indicator
Lights when an iPod/iPhone is connected and iPod/USB
input is selected (page 30
).
9
Remote sensor
Receives the signals from the remote control (see Operating
range of remote control on page 13).
10
MASTER VOLUME
dial
11
STANDBY/ON
12
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode (S.R AIR mode can be also selected with
ADAPTER input).
13
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 26
).
14
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
– Switches between
Auto surround mode (page 37
) and Stream Direct
playback (page 38
).
56
7
11
12 1514 17 1813
321 8 1049
16
19 20 21 23 24 21
27 28 29 30 30 3231
25
26
22
VSX-1024