Filter
Top Products
Basic playback
4
4
33
4
61
9
a. MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
b. Files encoded using Windows Media Codec 9 may be playable
but some parts of the specification are not supported;
specifically, Pro, Lossless, Voice.
c. Uncompressed FLAC files are not supported. Pioneer does not
guarantee playback.
Photo files
Playing a MHL-compatible device
MHL (Mobile High-definition Link) is an interface standard for
transmitting digital signals with mobile devices. MHL can
carry high quality multi-channel audio data and full-HD video
formats.
The MHL-compatible device’s video signals are output from
the TV connected to the receiver, the audio signals are output
from the speakers connected to the receiver or TV.
1
Press
STANDBY/ON
to switch on the receiver and
your TV.
See Connecting a MHL-compatible device on page 25.
2
Press
MHL ROKU
on the remote control to switch the
receiver to the MHL.
3
Select and play the desired contents on the MHL-
compatible device.
Note
•
MHL-compatible devices can be operated with the
receiver’s remote control by pressing the remote control’s
MHL ROKU
button, but depending on the MHL-compatible
device being used, some buttons may not be operable.
•
To playback from a MHL-compatible device connected to
the receiver on a TV that is also connected to the receiver,
the power to the receiver must be turned on.
Enjoy Roku video streaming service
Connect the Roku Streaming Stick (sold separately) to the
MHL
terminal on the main device to enjoy video streaming.
1
Press
STANDBY/ON
to switch on the receiver and
your TV.
See Connecting a MHL-compatible device on page 25.
2
Press
MHL ROKU
on the remote control to switch the
receiver to the MHL.
3
Select the contents you want to play and playback.
Note
•
When the Roku Streaming Stick (sold separately) is
connected to the main device via the MHL terminal, and
the power switched on for the first time, a setup screen will
be displayed. Setup can be changed later on as well, see
Setup ROKU standby mode
on page 56.
Extension Format
JPEG
.jpg Meeting the following conditions:
• Baseline JPEG format
• Y:Cb:Cr – 4:2:2