Filter
Top Products
Home Menu
7
7
57
4
61
9
Note
•
Power will be supplied even if a MHL device is connected.
4
When you’re finished, press
RETURN
.
You return to the Home Menu.
The Speaker System setting (VSX-1024 only)
Specify either using the surround back speaker (or the
speaker B), or the front height speaker connection with the B-
speaker terminals.
•
Default setting: Surr. Back
1
Select ‘Speaker System’ from the Home Menu.
2
Select the speaker system setting using
/
.
•
Surr. Back – Sound is output from the surround back
speaker.
•
Height – Sound is output from front height speaker.
•
SP-B – Enables Speaker B to be installed in another
room so that the sound of the stereo can be enjoyed
elsewhere.
•
Bi-Amp – Enables higher quality playback sound
through the front speakers with the connection of bi-
amp speakers.
•
ZONE 2 – In a separate room (subzone) from which the
receiver is located (main zone), one can enjoy playback
of a device connected to the receiver (multi-zone
function).
3
When you’re finished, press
RETURN
.
You return to the Home Menu.
The OSD Setup menu
Sets the overlay function ON/OFF.
1
Select ‘OSD Setup’ from the Home Menu.
2
Choose ON or OFF for the OSD Setup.
3
When you’re finished, press
RETURN
.
You return to the Home Menu.
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4. Auto Power Down
5. HDMI Setup
6. Network Standby
7. MHL Setup
8. Speaker System
9. OSD Setup
8
. Speaker System
Return
SP System Surr. Back
9
. OSD Setup
Return
OSD
ON
VSX-1024
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4. Auto Power Down
5. HDMI Setup
6. Network Standby
7. MHL Setup
8. Speaker System
9. OSD Setup