Additional information
09
34
En
Tuner
Error Messages
Glossary
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
Problem
Remedy
Considerable noise in
radio broadcasts.
• Connect the AM antenna (refer to
Connecting up
) and adjust the direction and position for best
reception. You may also connect an additional internal or external AM antenna (refer to
Connecting
external antennas
on page 27).
• Fully extend the FM wire antenna, position for best reception, and secure to a wall. You may also
connect an outdoor FM antenna (see
Connecting external antennas
on page 27).
• Turn off other equipment that may be causing the noise or move it further away.
• The tuning interval is incorrect for your country or region. See
Changing the frequency step
on
page 24 to switch the tuning interval.
Auto tuning does not
pick up some stations.
• The radio signal is weak. Auto tuning will only detect radio stations with a good signal. For more
sensitive tuning, connect an outdoor antenna.
Message
Description
2CH ONLY
• An operation is prohibited because it is only applicable to 2 channel sources, while the current
source is a multichannel source.
96K
• An operation is prohibited because the source is 96 kHz digital.
MUTING
• An operation is prohibited because the sound is muted (press
MUTE
).
EXIT
• Appears when a menu is automatically exited after a set period of inactivity.
NOISY
• Background noise is too high to complete MCACC setup successfully.
ERR MIC
• An error occurred during MCACC setup because the microphone is not connected or is not
connected properly.
ERR SP
• An error occurred during MCACC setup because the speakers are not connected or are not
connected properly.
EEP ERROR
• Contact your Pioneer authorized service center or your dealer for servicing.
NO SPTYP
• Try switching the unit off then on again. If the error still appears, please contact a Pioneer
authorized service center or your dealer.
Dolby Digital
A multi-channel audio
encoding system developed
by Dolby Laboratories that
enables far more audio to be
stored on a disc than PCM
encoding.
Dolby
Pro Logic II
A matrix decoding technology
developed by Dolby
Laboratories that expands any
two-channel source audio,
such as CDs and TV
broadcasts, to a five-channel
playback (left/center/right/left
surround/right surround),
resulting in a surround
experience.
DTS
A multi-channel audio
encoding system developed
by DTS that enables far more
audio to be stored on a disc
than PCM encoding.
HTS-570.book 34 ページ 2007年1月29日 月曜日 午後9時7分