Filter
Top Products
Listening to your system
05
21
En
English
Using Front Stage Surround Advance
The Front Stage Surround Advance modes are effective
when you are using the Front surround speaker setup as
described on page 7.
• Press F.S.SURR to select a Front Stage Surround
Advance mode.
Press repeatedly to select
FOCUS5.1
,
WIDE5.1
or
EXTRAPWR
.
•
FOCUS5.1
– Use to provide a rich surround sound
effect directed to the center area where the left and
right speakers’ sound projection converges.
•
WIDE5.1
– Use to provide a surround sound effect to
a wider area than
FOCUS5.1
mode.
•
EXTRAPWR
– Outputs stereo sound (in the case of
multi-channel sources, down-mixed stereo sound)
from the surround speakers for powerful stereo
effect.
Using Advanced Surround
The Advanced Surround effects can be used with any
multichannel or stereo source for a variety of additional
surround sound effects. These modes are designed to
provide optimum listening effect when using the
Standard surround setup described on page 9.
• Press
ADVANCED
to select an Advanced Surround
mode.
Press repeatedly to select:
•
ACTION
– Suitable for action movies
•
UNPLUGED
– Suitable for acoustic musical sources
•
EXPANDED
– Wide sound field
•
TV SURR.
– Surround sound for mono or stereo TV
broadcasts
•
SPORTS
– Suitable for sports programming
•
ADV.GAME
– Suitable for TV game units
•
VIRTUAL
– A virtual surround effect using just the
subwoofer and front speakers.
•
X-STEREO
– Powerful surround sound for stereo
music sources
Listening in stereo
You can listen to any source—stereo or multichannel—in
stereo. When playing a multichannel source, all
channels are downmixed to the front left/right speakers
and the subwoofer.
• Press
SURROUND
repeatedly until STEREO shows in
the display.
• You can also use the
SURROUND
button on the
display unit to change the listening mode.
Using the Sound Retriever
When audio data is removed during the MP3 or WMA
compression process, sound quality often suffers from
an uneven sound image. The Sound Retriever feature
employs new DSP technology that helps bring CD quality
sound back to compressed 2-channel audio by restoring
sound pressure and smoothing jagged artifacts left over
after compression.
•While listening to a stereo source, press
SOUND
RETRIEVER
.
Press repeatedly to switch between:
•
RTRV ON
— Switches the Sound Retriever on.
•
RTRV OFF
— Switches the Sound Retriever off.
ST
TUNE
ST
ENTER
TVCONTROL
TV
INPUT
SOUND
TEST
TONE
CHANNEL
SOUND
RETRIEVER
MCACCADVANCED F.S.SURRSURROUND
VOLUME
F. S . SURR
ST
TUNE
ST
ENTER
TV
INPUT
SOUND
TEST
TONE
CHANNEL
SOUND
RETRIEVER
MCACCADVANCED F.S.SURRSURROUND
VOLUME
ADVANCED
ST
TUNE
ST
ENTER
TV
INPUT
SOUND
TEST
TONE
CHANNEL
SOUND
RETRIEVER
MCACCADVANCED F.S.SURRSURROUND
VOLUME
SURROUND
ST
TUNE
TUNE
ST
ENTER
SOUND
TEST
TONE
SOUND
RETRIEVER
MCACCADVANCED F.S.SURRSURROUND
SOUND
RETRIEVER
HTS-570.book 21 ページ ２００７年１月２９日 月曜日 午後９時７分