Filter
Top Products
Additional information
15
57
En
English
Français
Deutsch
Nederlands
Italiano
Español
Tape deck
Error Messages
Sound is mono only. • Check that the tuner is not set to FM mono (see
Improving FM stereo sound
on page 22).
Problem
Remedy
Problem Remedy
Cannot record. • Check that the cassette still has its erase-protect tabs intact, or
that they are covered with self-adhesive tape (
Using cassette tapes
on page 52).
Sound is muffled or previous
recording is still audible
underneath the new one.
• The tape heads may be dirty. Clean the tape heads using a head-
cleaning cassette or cleaning kit.
• Check that you’re using a Type I (normal) tape. Do not use Type II
(high/CrO2) or Type IV (metal) tapes.
Music search does not work • The spaces between songs may be too short for music search to
work.
• Make sure that the tape is playing when using music search—it
will not work if the tape is stopped.
Recording made from the
LINE
input are distorted or very quiet.
• Set the line attenuator on or off as necessary (see
System Setup
menu options in standby
on page 48).
Message
Description
KEY LOCK
• This message appears when the front panel buttons are pressed
when the child lock feature is active. See
Optional system settings
on page 48 for more on switching on/off the child lock.
RMODE ON
• An operation is prohibited because the line recording mode is on
(see
Using the Sound menu
on page 27), or when recording to the
tape deck.
PHONES IN
• An operation is prohibited because headphones are connected.
96K
• An operation is prohibited because the source is digital 96kHz
PCM.
MUTING
• An operation is prohibited because the sound is muted.
EXIT
• Appears briefly when a menu is automatically exited after a set
period of inactivity.
NO MIC
• A karaoke feature is prohibited because no mic is connected.
MIC IN
• An operation is prohibited because the mic is connected.
EV-500-1000.book 57 ページ ２００５年４月５日 火曜日 午後１２時３１分