Additional information
15
49
En
English
Français
Deutsch
Nederlands
Italiano
Español
TV system setting
The default setting of this system is
AUTO
, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to
AUTO
. If you find picture distortion with
some discs, set the TV system to match your
country or region’s system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (
AUTO
,
PAL
and
NTSC
).
1
• After selecting
TV SYS
in step
3
above,
press
ENTER
to change the TV system.
The TV system as follows:
•
AUTO
NTSC
•
NTSC
PAL
•
PAL
AUTO
The system automatically switches on and
you’ll see the new TV system setting in the
display after seeing
Welcome
.
2
Using and taking care of discs
DVD Video regions
All DVD Video discs carry a region mark that
indicates which region(s) of the world the disc
is compatible with. Your DVD system also has
a region mark (on the rear panel). Discs from
incompatible regions will not play in this
player. Discs marked
ALL
play in any player.
Disc / content format playback
compatibility
This player is compatible with a wide range of
disc types (media) and formats. Playable discs
will generally feature one of the following logos
on the disc and/or disc packaging. Note
however that some disc types, such as
recordable CD and DVD, may be in an
unplayable format.
See the
Disc compatibility table
below for more
information.
• is a trademark of Fuji Photo Film Co. Ltd.
• is a trademark of DVD Format/Logo
Licensing Corporation
• Also compatible with KODAK Picture CD
This player supports the IEC’s Super VCD stan-
dard for superior picture quality, dual
soundtracks, and widescreen support.
Note
1 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col-
or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has
a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at
the top and bottom of the screen.
Disc Player setting
Type Format NTSC PAL AUTO
DVD/Super VCD/
Video CD/DivX
Video
NTSC
NTSC PAL
NTSC
PAL
NTSC PAL
PAL
CD/MP3/WMA/
JPEG/no disc
—
NTSC PAL
NTSC or
PAL
2 You have to switch the player into standby (press
STANDBY/ON
) before each change.
DVD-Video DVD-R DVD-RW
Video CD
Fujicolor CD
Audio CD CD-R
CD-RW
VIDEO
CD
Super Video CD (Super VCD)
EV-500-1000.book 49 ページ 2005年4月5日 火曜日 午後12時31分