Filter
Top Products
62
En/ChH
Advanced Sound Settings9
1 SYSTEM SETUP
÷ SHIFT
2 2 3 D.R.C.
3 5 ∞
÷ D.R.C. OFF
÷ D.R.C. LOW
÷ D.R.C. MEDIUM
÷ D.R.C. HIGH
4 ENTER
Dynamic Range Control
The dynamic range of a source is the difference between
the quietest and the loudest sounds. The dynamic range
of Dolby Digital soundtracks can be very great. This
makes them exciting, but it also means that when you
turn the volume down you can easily lose quiet dialog.
Switch on Dynamic Range Control to even out the
soundtrack volume.
1 Press SYSTEM SETUP.
• Access this function together with the
SHIFT button.
2 Press the 2 or 3 button until you see D.
R.C. in the display.
3 Use the 5 and ∞ buttons to select a
dynamic range setting.
• D.R.C. OFF Default setting (no change to the
dynamics)
• D.R.C. LOW Dynamic range is reduced by a
small amount.
• D.R.C. MEDIUM Mid setting
• D.R.C. HIGH Dynamic range is reduced by a
large amount (good for listening at very low volume).
4 Press ENTER to make the setting.
LFE
Low
Frequency Effects
1 SYSTEM SETUP
÷ SHIFT
2 2 3 LFE
ATT
3 5 ∞
÷ LFE ATT 0
÷ LFE ATT 10
÷ ATT OFF
4 ENTER
LFE Attenuator
Use the LFE (Low Frequency Effects) attenuator to
reduce the subwoofer level if it is distorting.
1 Press SYSTEM SETUP.
• Access this function together with the
SHIFT button.
2 Press the 2 or 3 button until you see LFE
ATT in the display.
3 Use the 5 and ∞ buttons to select a
dynamic range setting.
• LFE ATT 0 Default setting (no attenuation)
• LFE ATT 10 The LFE channel is attenuated
(reduced) by 10dB.
• ATT OFF The LFE channel is switched off.
4 Press ENTER to make the setting.