Pioneer X-MT2000 Stereo System User Manual


 
16
4 Getting Started
En
Playing CDs
The 3-disc changer lets you play up to three CDs back-to-back (or at random, or in your
own programmed order), and you can even change discs while another one is still
playing.
The basic features are explained here; more features are covered in chapter 5 starting on
page 19.
1 Press 0 for disc 1 on the top panel to open disc tray 1.
The unit automatically switches on when you press any of the 0 (OPEN/CLOSE)
buttons.
2 Load a CD.
Make sure that the label is face-up and that the CD is seated properly in the disc guide.
Don't use an adaptor with 8cm CD singles as it may damage the player.
Don’t load more than one disc at a time in a disc guide.
3 Press 0 for disc 1 to close disc tray 1.
4 Press CD SELECT 1 (top panel) or CD1 (remote) to start playing
disc 1.
The current disc indicator shows which disc is selected.
You can use the CD SELECT buttons (CD1, CD2 and CD3 on the remote) to
automatically switch on the system from standby and start playing a CD if there’s one
loaded.
5 Adjust the volume and tone to your liking.
Use the volume control on the front panel, or the VOLUME + and VOLUMEbuttons
on the remote to adjust the volume.
To adjust the tone, first press BASS or TRE on the remote, then use the 4 and ¢
buttons to adjust. (On the top panel, press BASS/TREBLE to select either bass or treble,
then use the 1 / 4 and ¡ / ¢ buttons to adjust.)
6 To skip to a different track:
Press 4 once to skip to the start of the current track. Further presses skip to
previous tracks.
Press ¢ to skip to the next track. Further presses take you to subsequent tracks.
Use the number buttons (remote only) to jump straight to that track number. For
track 10 use the 10/0 button; for tracks 11 and over, use the >10 button. For
example, press >10, 6 for track 16; or >10, >10, 4 for track 24.
7 For fast scanning:
Press and hold 4 (remote) or 1 / 4 (top panel) for fast reverse scanning.
Release to resume normal playback.
Press and hold ¢ (remote) or ¡ / ¢ (top panel) for fast forward scanning.
Release to resume normal playback.
8 To pause playback, press 6.
Press again to restart playback.
9 To stop playback, press 7.
BASS
TRE
CD 1
123
456
789
10/0 >10
7
6
V
O
L
U
M
E
V
O
L
U
M
E
+
REMOTE CONTROL UNIT
STANDBY
STANDBY/ON
BASS/TREBLE
CD SELECT
OPEN/CLOSE
TUNING
!⁄
›
$
)
)
)
&
#*
1
2
3