Pioneer X-MT2000 Stereo System User Manual


 
14
3 Controls and Displays
En
Remote control
1 POWER – Press to switch the unit on or into standby.
2 DISPLAY/CLOCK – Press to change the information shown in the display.
3 DIMMER – Use to change the brightness of the display.
4 TIMER – Press to set the wake up timer.
5 SLEEP – Press to set the sleep timer.
6 SNOOZE – Press for snooze function when using the wake up timer.
7CD – Press for CD mode. Also switches the system on if it was in standby.
8AUX – Press for auxiliary mode. Also switches the system on if it was in standby.
9 FM/AM TUNER – Press for tuner mode, and to switch between AM and FM. Also
switches the system on if it was in standby.
10 MONO – Press to hear a stereo FM broadcast in mono (improves the sound quality).
11 6 – Press to start or restart playback, or pause a disc that's already playing.
12 4 and ¢ – When listening to CDs, press to skip back/forward tracks; press and
hold for fast reverse/forward play. When listening to the radio, use for turning and use to
tune into stations and select preset stations.
13 ENTER – Use to save a radio station preset; set the clock or timer.
14 7 – Press to stop playback. Also cancels auto scan tuning.
15 Number buttons – When playing CDs, use to select track numbers. When listening
to the radio, use to select preset stations.
16 C – Press to clear a CD playlist.
17 CD buttons – Press to select discs. Also switches the system on if it was in standby.
18 PGM – Press to start programming a CD playlist.
19 RANDOM – Press to start random CD playback.
20 REPEAT – Use to select the repeat mode (1-track, current disc or all-disc).
21 VOLUME +/– – Use to adjust the volume.
22 BASS / TRE – Use to adjust the tone (bass and treble) of the sound.
23 PLAY MODE – Use to select single disc play, or all-disc play.
Remote control range
Keep in mind the following when using the remote control:
Make sure that there are no obstacles between the remote and the remote sensor on
the unit.
Use within the operating range and angle, as shown left.
Remote operation may become unreliable if strong sunlight or fluorescent light is
shining on the unit’s remote sensor.
Remote controllers for different devices can interfere with each other. Avoid using
remotes for other equipment located close to this unit.
Replace the batteries when you notice a fall off in the operating range of the remote.
30 30
7 m / 23 ft.
ENTER
BASS
TRE
RANDOM REPEAT
PGM
CD 3
CD 2
CD 1
MONOTUNER
FM/AM
AUXCD
DISPLAY
/CLOCK
SNOOZESLEEPTIMERDIMMER
123
456
789
10/0 >10 C
PLAY MODE
POWER
7
6
V
O
L
U
M
E
V
O
L
U
M
E
+
REMOTE CONTROL UNIT
6
7
10
1 2
21 23
3
18
19
20
11
14
15 16
17