Filter
Top Products
Connecting up
03
13
En
English
Français
Deutsch
Nederlands
Italiano
Español
Connecting a DVD player and TV
This page shows you how to connect your DVD
player and TV to the receiver.
1 Connect a coaxial digital audio output on
your DVD player to the DIGITAL COAX 1
(DVD/LD) input on this receiver.
Use a coaxial digital audio cable for the
connection.
1
2 Connect the composite video output and
the stereo analog audio outputs
2
on your
DVD player to the DVD/LD inputs on this
receiver.
Use a standard RCA video cable
3
and a stereo
RCA phono cable for the connection.
• If your DVD player has multichannel
analog outputs, see
Connecting the
multichannel analog outputs
below for how
to connect it.
3 Connect the analog audio outputs from
your TV to the TV/SAT inputs on this receiver.
This will allow you to play the sound from the
TV's built-in tuner. Use a stereo RCA phono
cable to do this.
• If your TV has a built-in digital decoder, you
can also connect an optical digital audio
output from your TV to the
DIGITAL OPT 1
(TV/SAT)
input on this receiver. Use an
optical cable for the connection.
4 Connect the MONITOR OUT video jack on
this receiver to a video input on your TV.
Use a standard RCA video cable to connect to
the composite video jack.
4
* The illustration shows the VSX-515, but
connections for the VSX-415 are the same.
Note
1 If your DVD player only has an optical digital output, you can connect it to the optical input on this receiver using an optical
cable. When you set up the receiver you'll need to tell the receiver which input you connected the player to (for the VSX-415 see
Digital input settings
on page 40 and for the VSX-515 see
The Input Assign menu
on page 44).
2 This connection will allow you to make analog recordings from your DVD player.
3
VSX-515 model only
– If your player also has a component video output, you can connect this too. See
Using the component
video jacks
on page 16 for more on this.
4
VSX-515 model only
– See
Using the component video jacks
on page 16 if you want to use the component video outputs to con-
nect this receiver to your TV.
COAX
COAX
OPT
(TV/SAT)
(DVD
/LD)
(CD)
ASSIGNABLE
DIGITAL IN
1
1
2
AM
LOOP
FM UNBAL
75
Ω
IN
IN
IN
MONITOR
OUT
OUT
VIDEO
SUB
WOOFER
R
AUDIO
L
IN
IN
IN
IN
OUT
OUT
IN
CD
DVR/
VCR
TV/
SAT
DVD
/LD
PLAY
CD-R
/ TAPE
/ MD
FRONT
PREOUT
REC
ANTENNA
D V D
5.1CH
INPUT
This receiver*
TV
ANALOG AUDIO OUT
LR
DIGITAL
AUDIO OUT
OPTICAL
VIDEO IN
DVD player
AUDIORL
DIGITAL OUT
ANALOG OUT
COAXIAL
VIDEO OUT
1
2
3
4
VSX_415-515.fm 13 ページ ２００４年１２月８日 水曜日 午後３時１２分