Filter
Top Products
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. If this is the
case, be sure to connect 2* to 5* and 4* to 3*.
Speaker leads
Cap (1*)
When not using this terminal,
do not remove the cap.
ISO connector
Rear output
Fuse holder
1*
2*
4*
3*
5*
White/yellow
Antenna jack
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
Black (ground)
To vehicle (metal) body.
Orange
To lighting switch terminal.
Blue/white
To Auto-antenna relay control terminal.
(Max. 300 mA 12 V DC.)
Connect leads of the same
color to each other.
Note:
In some vehicles, the ISO connector may be
divided into two. If this is the case, be sure to
connect to both connectors.
See the section “RFP Alert
Installation”.
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
: Front left +
: Front left ≠
: Front right +
: Front right ≠
: Rear left +
: Rear left ≠
: Rear right +
: Rear right ≠
Multi-CD player
(sold separately)
IP-BUS input
(Blue)
IP-BUS cable
This Product
6
Connecting the Units
ENG/MASTER 98
6
C
D
E
F
A
B