Filter
Top Products
34
ENG/MASTER 98
34
Using RDS Functions
Canceling Traffic Announcements
• Press the TA button while a traffic announcement is being received to cancel
the announcement and return to the original source.
The announcement is canceled but the tuner remains in the TA mode until the TA button is
pressed again.
Adjusting the TA Volume
When a traffic announcement begins, the volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
• Set the volume by adjusting it during reception of a traffic announcement.
The newly set volume is stored in memory and recalled for subsequent traffic announce-
ments.
TP Alarm Function
About 30 seconds after the “TP” or “EON” indicator is extinguished due to a weak signal,
a 5 second beep sounds to remind you to select another TP or EON-TP station.
• If you are listening to the tuner, tune in another TP station or EON-TP sta-
tion.
In the built-in MD player, multi-MD player or multi-CD player mode, the tuner automati-
cally seeks out the TP station with the strongest signal in the current area 10 (or 30)* sec-
onds after “TP” disappears from the display.
* Time taken before Seek begins.
TA function ON 10 seconds
TA, AF functions ON 30 seconds