Filter
Top Products
Using Multi-CD Players
ITS (Instant Track Selection)
The ITS function allows you to search for the track you wish to play when one or more
multi-CD players are installed. You can use ITS to program automatic playback of up to
24 tracks per disc from up to 100 discs. (You can store ITS program and Disc Title data for
up to 100 discs in memory.)
ITS Programming (ITS)
ITS programming can be conducted in any multi-CD player playback mode except ITS
play.
1. Play the track you wish to program.
2. Select the ITS Programming mode (ITS) in the Detailed Setting Menu.
(Refer to page 27.)
Note:
• After 100 discs have been programmed, data for a new disc will overwrite the data for the disc that
has not been played back for the longest time.
ITS Play (ITS-P)
ITS play of tracks is performed within the play range explained in the “Repeat Modes”
section.
1. Press the FUNCTION button and select the ITS Play mode (ITS-P) in the
Function Menu.
Note:
• If no track in the current range is programmed for ITS play “ITS EMPTY” is displayed.
2. Switch ITS play ON/OFF with
the 5/∞ buttons.
After selecting the desired repeat
mode play range from those referred
to in “Repeat Modes”on page 41,
switch ITS play ON.
3. Program the desired track with
the 5 button.
44
ENG/MASTER 96
44