Filter
Top Products
TA Function (TA)
The TA (Traffic Announcement standby) function lets you receive traffic announcements
automatically, no matter what source (tuner, built-in MD player, multi-MD player or
multi-CD player) you are listening to. The TA function can be activated for either a TP sta-
tion (a station that broadcasts traffic information) or an EON TP station (a station carrying
information which cross-references TP stations).
Activating/Deactivating the TA Function
1. Tune in a TP or EON TP station.
The “TP” indicator lights when the tuner is tuned to a TP station, and both the “EON” and
“TP” indicators light when it is tuned to an EON TP station.
2. Activate the TA function.
The “TA” indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to deacti-
vate the TA function.
Note:
• You can also switch the TA Function ON/OFF in the Function Menu.
• The system switches back to the original source following traffic announcement reception.
• The TA function can be activated from the built-in MD player, multi-MD player or multi-CD play-
er mode if the tuner was last set to the FM band but not if it was last set to the MW/LW band.
• If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions
while listening to an MD or a CD.
• Only TP or EON-TP stations are tuned in during the Seek Tuning mode when the “TA” indicator is
ON.
• Only TP or EON-TP stations are stored by BSM when the “TA” indicator is ON.
“TA”
33
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
ENG/MASTER 98
33