Filter
Top Products
Specifications
General
Power source ............................. 14.4V DC (10.8 V to 15.1 V
allowable)
Grounding system ...................Negative type
Max. current consumption
.....................................................10.0 A
Dimensions (W × H ×D):
DIN
Chassis .....................178 × 50 × 162 mm
Nose ...........................188 × 58 × 15 mm
D
Chassis .....................178 × 50 × 162 mm
Nose ...........................170 × 46 × 15 mm
Weight ..........................................1.5 kg
Audio
Maximum power output.......50 W × 4
50 W × 2/4W + 70 W × 1/2
W (for subwoofer)
Continuous power output ...22 W × 4 (50 Hz to15000
Hz, 5% THD, 4W load, both
channels driven)
Load impedance ......................4 W to 8 W ×4
4 W to 8W ×2+2W ×1
Preout maxoutput level/output impedance
.....................................................2.2 V/1 kW
Equalizer (3-Band Parametric Equalizer):
Low
Frequency ................ 40/80/100/160 Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6dB
when boosted)
Gain ............................ ±12 dB
Mid
Frequency ................ 200/500/1k/2k Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6dB
when boosted)
Gain ............................ ±12 dB
High
Frequency ................ 3.15k/8k/10k/12.5k Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6dB
when boosted)
Gain ............................ ±12 dB
Loudness contour:
Low .......................................+3.5 dB (100 Hz), +3 dB (10
kHz)
Mid .......................................+10 dB (100Hz), +6.5 dB
(10 kHz)
High ..................................... +11 dB (100 Hz), +11 dB
(10 kHz)
(volume: –30 dB)
HPF:
Frequency .......................... 50/63/80/100/125 Hz
Slope ....................................–12 dB/oct
Subwoofer (mono):
Frequency .......................... 50/63/80/100/125 Hz
Slope ....................................–18 dB/oct
Gain ...................................... +6 dB to –24dB
Phase ..................................Normal/Reverse
Bass boost:
Gain ...................................... +12 dB to 0 dB
CD player
System ..........................................Compactdisc audio system
Usable discs ..............................Compact disc
Signal format:
Sampling frequency .....44.1 kHz
Number of quantization bits
...........................................16; linear
Frequency characteristics ...5 Hz to 20000 Hz (±1dB)
Signal-to-noise ratio ...............94 dB (1 kHz) (IEC-A net-
work)
Dynamic range .........................92 dB (1 kHz)
Number of channels ..............2 (stereo)
MP3 decoding format ...........MPEG-1 & 2 AudioLayer 3
WMA decoding format .........Ver. 7, 7.1,8, 9, 10 (2ch
audio)
(Windows Media Player)
WAVsignal format .................. Linear PCM & MS ADPCM
FM tuner
Frequency range ...................... 87.5MHz to 108.0 MHz
Usable sensitivity .....................8 dBf (0.7µV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ...............75 dB (IEC-A network)
Distortion..................................... 0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65dBf, 1kHz,
mono)
Frequency response ...............30 Hz to 15 000 Hz (±3 dB)
Stereo separation ....................45 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range ...................... 531 kHz to 1602 kHz (9 kHz)
Usable sensitivity .....................18 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
LW tuner
Frequency range ...................... 153 kHz to 281 kHz
Usable sensitivity .....................30 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Additional Information
En
38
Appendix