Filter
Top Products
3 Press a or b to adjust the source vo-
lume.
+4 to –4 is displayed as the source volume is
increased or decreased.
Notes
! The MW/LW tuner volume level can also be
adjusted with source level adjustments.
! The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press FUNCTION and hold until function
name appears in the display.
3 Press FUNCTION repeatedly to switch
between the following settings:
CALENDAR (date and clock)—OFF CLOCK
(off clock)—FM STEP (FM tuning step)—
AUTO PI (auto PI seek)—WARNING TONE
(warning tone)—AUX1 (auxiliary input1)—
AUX2 (auxiliary input2)—DIMMER (dimmer)
—S/W CONTROL (rear output and subwoofer
controller)—TITLE (multi language)—
DEMONSTRATION (feature demo)—
EVER-SCROLL (ever scroll)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down FUNCTION until the unit turns off.
Setting the date and clock
Use these instructions to set the clock.
1 Press FUNCTION to select clock.
2 Press c or d to select the segment you
wish to set.
Day—Month—Year—Hour—Minute
As you select segments of the clock display
the segment selected will blink.
Operating this unit
En
22
Section
02