Filter
Top Products
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Up to 18 stations, six for each of three SIR-
IUS bands can be stored in memory.
% When you find a station that you want
to store in memory keep touching a preset
tuning key P1 to P6 until PCH SET is dis-
played.
The selected station has been stored in mem-
or y.
The next time you touch the same preset tun-
ing key P1 to P6 the station is recalled from
memory.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P1 to P6 are not displayed, you can dis-
play them by touching LIST.
Selecting the SIRIUS channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
% Touch MODE to select the desired chan-
nel select mode.
Touch MODE repeatedly to switch between
the following channel select modes:
CH-Number (channel number select setting)
—Category (channel category select setting)
Selecting a channel in the channel
category
Channels are organized into various program
categories, e.g. Rock, Classic, Jazz. You can
specify channels by selecting the desired
category.
1 Touch MODE to select the channel cate-
gory select mode.
Touch MODE repeatedly to switch between
the following channel select modes:
CH-Number (channel number select setting)
—Category (channel category select setting)
2 Touch a or b to select the desired chan-
nel category.
3 Touch c or d to select the desired chan-
nel in the selected channel category.
Selecting a SIRIUS channel directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1 Touch DIRECT.
CHANNEL INPUT appears in the display.
2 Touch 0 to 9 to input the desired chan-
nel number.
# To cancel the input numbers, touch C.
3 While the input number is displayed,
touch ENTER.
The SIRIUS channel of entered number is
selected.
Displaying the Radio ID
If you select CH:000, the ID code is displayed.
% Touch c or d to select CH : 000.
# To select CH:000, set the channel select set-
ting to CH-Number. About the channel select set-
ting, refer to Selecting the SIRIUS channel select
mode on this page
Available accessories
En
48
Section
04