Philips MZ5 Stereo System User Manual


 
Activating and deactivating
TIMER
Press either:
on the remote control,
TIMER during playback or in standby mode.
on the set,
PROGRAM in standby mode.
Display shows N if activated, and disappears
if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the unit to switch off by
itself after a set period of time.The clock time
needs to be set first before the sleep timer can
be used.
During playback to select and activate your
desired sleep time, press SLEEP on the remote
control once or more.
Display shows SLEEP and one of the sleep
time options in sequence:
60, 45, 30,15, SLEEP OFF,60...
To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown,or press to standby on the set or remote
control.
SLEEP disappears from the display.
Playing a CD
This CD player plays Audio Discs including
CD-Recordables and CD-Rewritables.
CD-ROM,CD-I, CDV,VCD, DVD, MP3 or
computer CDs, however, are not possible.
1 Select CD source.
2 Press OPEN/CLOSE to open the CD tray.
OPEN is displayed when you open the CD
compartment.
3 Insert a CD with the printed side facing up and
press down on OPEN/CLOSE to close the
CD tray.
READ is displayed as the CD player scans
the contents of a CD,and then the total
number of tracks and playing time are shown.
NO DISC is displayed if you have inserted
no disc.
DISC NOT READABLEscrolls across the
display if you insert a CD incorrectly or a non
finalised CD-R(W).
4 Press 2; to start playback.
Current track number and elapsed playing
time of the track are displayed during CD
playback.
5 To interrupt playback press 2; .
Press 2; again to resume playback.
The display freezes and the elapsed playing
time flashes when playback is interrupted.
6 To stop CD playback,press 9.
Note:
CD play will also stop when:
– the CD tray is opened;
– the CD has reached the end;
– you select another source:TAPE,CD or AUX.
Selecting a different track
Press ¡1 or 2™ on the set, (on the remote
control ¡ or ) once or repeatedly until the
desired track number appears in the display.
If you have selected a track number shortly after
loading a CD or in the PAUSE position,you will
need to press 2; to start playback.
TIMER/SLEEP CD Player
13
English
CD
SHUFFLE
PROGRAM
DBB
IO
IO
IOII
IO
II
IO
II
IO
II
IO
IO
I II
OPEN
CLOSE
PRESET
TUNING
MC 158 COMPACT AUDIO SYSTEM
IOIO
IOII
IOII
IO
II
IO
II
IO
IO
I II
OPEN
CLOSE
PRESET
TUNING
MC 158 COMPACT AUDIO SYSTEM
XP MZ5/37 15-03-2002 11:23 Pagina 13