Setting the clock
1 In standby, press CLOCK.
➜ The clock digits for the hours and the AM/PM
indication flash 0:00.
2 Tur n VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3 Press CLOCK again.
➜ The clock digits for the minutes and the
AM/PM indication flash 0:00.
4 Tur n VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5 Press CLOCK to confirm the time.
Setting TIMER
• The unit can be used as an alarm clock,whereby
the set is switched on at a set time.The clock
time needs to be set first before the timer can
be used.
• During setting, if more than 90 seconds elapses
without a button being pressed the unit quits the
timer setting mode.
1 Press PROGRAM on the set for 2 seconds or
more in standby mode.
➜ Display shows TUNER or CD and N flashes
➜ Display shows SET CLOCK TIME if the
clock has not been set
2 Tur n VOLUME clockwise.
➜ Display sequence shows CD,TUNER, CD...
3 Press PROGRAM (on the set) to confirm
source.
➜ Display shows ON 0:00, the clock digits for
the hours 0:00 and the AM/PM indication
flash.
4 Tur n VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5 Press TIMER or PROGRAM again.
➜ The clock digits for the minutes flash.
6 Tur n VOLUME to set the minutes:clockwise for
minutes up;anti-clockwise for minutes down.
7 Press TIMER or PROGRAM to confirm the
time.
– The timer is now set and activated.
➜ Display shows N.
Clock Timer
12
English
