Filter
Top Products
17
English
Discs information
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3
DVD-VIDEO DISC
● DVD video discs may have one or more Titles, and each
Title may have one or more Chapters.
● Playback stops at the end of each Title.
2 3 5 6 7 8 9 10 11 12 ...41
TRACKS
AUDIO CD
● Audio CDs contain only Tracks.
Basic playback
CAUTION!
– Do not move the disc player during playback, as
doing so might damage the DVD system.
– Do not push on the disc tray or put any objects
other than disc on the disc tray. Doing so may
cause the disc player malfunction.
1 Press POWER to switch the
system on.
2 Adjust SOURCE (or press
DVD/CD on the remote control)
to select DVD/CD.
3 Press one of the OPEN 0 to
open the desired disc tray.
4 Load a disc with the label side
facing up.
5 Press again the corresponding OPEN 0 button to close
the disc tray.
➜ There will be a short delay while the player identifies
the disc and reads the menu from the disc.
➜ The selected disc’s number begins to flash.
● Some discs will start playing automatically, while others will
display the Disc Contents Menu on the TV screen. If the
menu is presented, use 341 2 keys to highlight your
selection and press OK to confirm or numeric keypad
(0-9) to select a play option.
6 Press £ (ÉÅ ) to start playback.
Notes:
– If you leave the disc tray open for more than 8 minutes,
the disc tray automatically closes.
– Your player will not play discs that have a region code
different from the region code of your player.
– When the inhibit icon (Ä) appears on the TV screen when a
button is pressed, it means the function is not available on the
disc you are playing.
To interrupt playback
● Press £ (ÉÅ ).
➜ The picture freezes and the sound will be muted.
● To resume playback, press £ (ÉÅ ) again.
To stop playback
● Press Ç.
To select a another disc
● Press DISC SKIP (or DVD/CD) until the desired disc
loads.
➜ The current selected disc’s number and “LOADING”
begin to flash.
➜ If a disc has loaded, it automatically plays.
Playing an MP3 disc
Playing an MP3 disc is only possible within an album.
1 Load an MP3 disc.
➜ The MP3 menu is displayed on the TV screen.
2 To select a desired album, press 1 / 2, 3 / 4 button,
followed by £ (ÉÅ ) or OK.
➜ On the player display screen, “FOLDER XX” is
displayed.
3 To select a desired title, press 1 / 2, 3 / 4 button.
➜ On the player display screen, “FILE XXX” is displayed.
● To return to the previous menu, press Ç, followed by
1 / 2, 3 / 4 button.
4 To start playback, press £ (ÉÅ ).
➜ The disc will stop playing after completing the playback
of all the titles in the selected album.
● To play the next or previous title during playback, press
S or T button.
● You can also select the desired album/title number directly
using the numeric keypad (0-9).
➜ In stop mode, numbers are used for album selection.
➜ In play mode, numbers are used for title selection.
Notes:
– When the system does not read a file, “?” will be displayed.
– It is not possible to create a program with MP3 tracks from
multiple CDs, or combined with normal audio tracks.
Operations
OPERATIONS
POWER ON/OFF