Filter
Top Products
You may set the DVD Receiver to display a DVD picture in one of three
formats: Letterbox, Pan & Scan, or Wide. The format you select must be
available on the DVD. To choose a format, follow these steps.
1
While playback is stopped, press SYSTEM MENU. Press ;
or - to select the icon.
2
Press 9 to select , then press
::
.
3
Press 9 to select TV SHAPE, then press
::
.
4
Press 9 or 8 to select 4:3 PS (pan & scan), 4:3 LB
(Letterbox), or 16:9 (Widescreen), then press OK.
● Select 4:3 PS (pan & scan) if you want both sides of the picture to
be trimmed (or formatted to fit your TV screen). This setting is
possible only if the DVD is recorded in pan & scan or regular for-
mat. Check the Disc case for details.
● Select 4:3 LB (letterbox) if you want to see the picture with black
bars at the top and bottom of the screen. This looks like the pic-
ture you see when watching movies in a theater. This setting is pos-
sible only if the DVD was recorded in the letterbox or widescreen
format. Check the Disc case for details.
● Select 16:9 if you connected the DVD Receiver to a widescreen
TV. Also remember to set the TV to its “full size” setting.
5
Press SYSTEM MENU to remove the menu.
TV SHAPE 4:3 PS
TV SYSTEM 4:3 LB
VIDEO OUT 16:9
SCR SAVER
SET TO PAN SCAN
ZY dZY d
28 TV Shape
1,5
1-4
Pan & Scan Letterbox
Widescreen (16:9)