Filter
Top Products
There are many playback features and options available on Discs. After learn-
ing the basic operations of the DVD Receiver and the remote control, refer
to the later sections of this manual to learn playback features.
1
Press STANDBY-ON
yy
(or DISC) to turn on the DVD
Receiver. The red Standby light will disappear from the front of the
DVD Receiver.
2
Turn the SOURCE dial on the DVD Receiver (or press TV/AV,
DISC, TUNER or AUX on the remote control) to select a sound
source.
●The DVD Receiver’s display panel will show the selected source
(TV/AV, AUX, AM/FM, etc.).
●Press DIM on the remote to adjust the brightness of the DVD
Receiver’s display panel.
3
Turn on your TV and set it to the correct Video In channel.
You should see the DVD Receiver’s background screen on the TV.
4
Press OPEN/CLOSE c on the front of the DVD Receiver to open
the Disc tray. Load your Disc in the tray, with the label facing up as
you place the Disc in the tray.
●If the Disc is two-sided, make sure the label of the side you want
to play is facing up.
5
Press OPEN/CLOSE c again to close the tray. Playback may begin
automatically.
6
If playback does not start automatically, press PLAY/PAUSE
Bk.
●If DVD playback does not start automatically, a DVD Disc Menu
may appear.
●If the Titles or Chapters are numbered, press a Number button to
select an item. Or, press 98 ; : to select an item, then press
OK.
7
To stop playback at any time, press STOP C.
●To continue Disc playback after an interruption, press RESUME
before pressing STOP C. (The last viewed scene will be kept in
memory.) Press RESUME again to restart Disc playback at
this point.
●If you remove the Disc after pressing STOP C,,, the Resume point
will not remain in memory.
DVD Disc Menus
DVD Disc Menus vary among DVDs. The DVD Disc Menus allow you to
choose different playback features from those available on the Disc.
If the DVD has a menu, access it by pressing DISC MENU on the remote con-
trol. If the current Title of the current DVD has a specific Title Menu, it may
appear on the TV screen. Otherwise, the general DVD Disc Menu will
appear.
Use
99 88 ;; ::
to select a Title, Chapter, or other feature, then press
PLAY/PAUSE Bk or OK to start playing the Disc or to use a feature.
VOLUMESOURCE
STANDBY
-
ON
OPEN•CLOSE
PLAY•PAUSE
PREV NEXT SURROUND
STOP BASS
TREBLE
PROGRAM
DVD VIDEO DIGITAL SURROUND SYSTEM
16 Quick Disc Playback
• If the Disc is Locked by Parental
Control, you must enter the four-
digit code to unlock the Disc.
Details are on pages 33-34.
• DVDs have a region code. Your
DVD Receiver will not play Discs
that have a region code other
than 1 (one). Details are on
page 5.
• Resume may not be available
with some DVDs. Resume may
apply to some Video CDs also.
Helpful Hints
6
4,5
7
AV IN
or
EXT1
2
3
1