Filter
Top Products
24
English
Clock/Timer
Setting the clock
The clock can be set in either 12-hour or 24-
hour mode (“AM12:00” or “00:00”, for
example).
1 In normal standby mode, press CLOCK SET.
➜ The clock digits for the hours flash.
2 Press PROGRAM on the set repeatedly to
select the clock mode.
➜ “AM12:00” or “00:00” is displayed with
“AM12” or “00” flashing.
3 Press VOLUME (3 / 4) (+/-) to set the hours.
4 Press CLOCK SET again.
➜ The clock digits for the minutes flash.
5 Press VOLUME (3 / 4) (+/-) to set the
minutes.
6 Press CLOCK SET to confirm the time.
Note:
– The backlight for clock display is dim in standby.
Viewing the clock
● Press CLOCK SET in power-on mode.
➜ The clock time is displayed.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, TUNER, DAB, AUX is switched
on at a set time. The clock time needs to be set
first before the timer can be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In normal standby mode, press and hold TIMER
on the remote control for more than 3 seconds.
➜ The display shows SET TIMER and the
clock digits for the hours flash
2 Press VOLUME (3 / 4) (+/-) to set the hours.
3 Press TIMER again.
➜ The clock digits for the minutes flash.
4 Press VOLUME (3 / 4) (+/-) to set the
minutes.
5 Press TIMER to confirm your desired mode or
just wait a while without any operation.
➜ The display shows SET SOURCE and a
source option flashes.
6 Press VOLUME (3 / 4) (+/-) to select sound
source.
➜ Display sequence shows CD, TUNER, DAB,
AUX.
6 Press TIMER again to confirm.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
● Press TIMER on the remote to turn off the
timer or turn on to the last setting again.
➜ If activated, the display shows .
Note:
– The system will exit timer setting mode if no
button is pressed within 90 seconds.
Activating and deactivating
SLEEP
The sleep timer enables the
system to switch off by itself
after a set period of time.
● Press SLEEP on the remote
control.
➜ SLEEP flashes and the display shows one of
the sleep time options in sequence: 90, 80, 70,
60, 50, 40, 30, 20, 10, OFF... if you have
selected a time. Once SLEEP is activated,
SLEEP is displayed.
● To deactivate, press SLEEP on the remote
control once or more until OFF is shown, or
press STANDBY-ON/ ECO POWER (or B
on the remote).
➜ SLEEP disappears.
pg001-026_MCB240_22-Eng 2005.8.1, 13:3224