Filter
Top Products
14
English
Basic playback controls
To play a disc
● Press ÉÅ to start playback.
➜ The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
● Press S/T once or repeatedly until the
desired track number appears in the display.
● If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press ÉÅ to start playback.
Text display during playback
In CD mode
● Press DISPLAY•ID3 repeatedly to see the
following information.
➜ Track number and elapsed play time of
current track.
➜ Remaining play time of current track.
➜ Total number of tracks played and total
elapsed time.
➜ Total remaining number of tracks and total
remaining play time.
In MP3-CD mode
● Press DISPLAY•ID3 repeatedly to select four
display modes : Number, Album &Title, Album &
Tr ack Number and ID3.
Number ➜ Track number and elapsed play time.
Album &Title ➜ Album name and track title
name.
Album & Track Number ➜ Album number
and track number.
ID-3 ➜ ID-3 tag scrolls once
Important!
The lens of the CD player should never be
touched.
Loading a disc
This CD player plays Audio Discs including CD
Recordables, CD-Rewritables and MP3 CD.
● CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1 Press SOURCE on the front panel of the
system to select CD or press CD on the
remote.
2 Press OPEN•CLOSEç to open the CD
compartment.
➜ OPEN is displayed when the compartment
cover slides up.
3 Insert a disc with the printed side facing up.
Press OPEN•CLOSEç again to close the
compartment.
➜ CLOSE is displayed followed by READING as
the CD player scans the contents of a disc, and
then the total number of tracks and playing time
(or the total number of albums and tracks for
MP3 disc) are shown.
CD/MP3-CD Operation
pg001-026_MCB240_22-Eng 2005.8.1, 13:3214