Filter
Top Products
English
13
Basic Functions
Important!
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press STANDBY-ON/ECO POWER (or B
on the remote).
➜ The system will switch to the last selected
source.
● Press CD, TUNER, DAB or AUX on the
remote control.
➜ The system will switch to the selected source.
● Press OPEN•CLOSEç.
➜ The system will switch to the CD source.
Switching the system to Eco
Power Standby mode
● Press STANDBY-ON/ECO POWER (or B
on the remote).
➜ The backlight for clock display is dim in
standby.
➜ The ECO POWER LED will be lighted.
● To view clock time in standby mode, press and
hold STANDBY-ON/ECO POWER (or B
on the remote) for more than 3 seconds or
more.
➜ The system enters the standby mode with
clock display.
● The volume level (up to a maximum volume
level of 20), interactive sound settings, last
selected mode (ECO Power Standby or normal
standby), source and tuner presets will be
retained in the player's memory.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to Eco Power/ Standby 15
minutes after a CD has reached the end and no
control is operated.
Adjusting volume and sound
1 Press VOLUME 3 / 4 (+/-) to decrease or
increase the volume.
➜ Display shows the volume level VOL and a
number from MIN 1, 2, ...30, 31 MAX.
2 Press DSC repeatedly to select the desired
sound effect: POP/JAZZ/ROCK/CLASSIC.
3 Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB ON or DBB OFF.
4 Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and
MUTE will flash on the display.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
pg001-026_MCB240_22-Eng 2005.8.1, 13:3213