Filter
Top Products
20
English
DAB Reception
➜ Display shows: current station name at the
top display line and available presets at the
bottom.
2 Press ENTER to confirm.
➜ Your desired preset radio station plays.
Viewing the service info
You can view the DAB service info in the
following 7 information modes. Depending on
the DAB radio station you are tuning to, some
information modes may be unavailable.
● To scroll through the information options, press
DISPLAY•ID3 repeatedly until your desired
option appears.
➜ 1st display line: current station name. 2nd
display line: selected service info
DLS (Dynamic Label Segments)
– Displays the scrolling broadcasting text (in
default setting).
Program Type
– Describes content type (e.g. jazz, pop)
Multiplex Name
– Specifies the multiplex of current service. (A
multiplex is a group of stations broadcast by a
multiplex operator.)
Date and Time
– Shows the date & time of current multiplex.
Channel & Frequency
– Displays the channel and central frequency of
current multiplex.
Bit Rate and Audio Status
– Displays the transmission rate of broadcasting
date in bits per second (kbps);
– Display the audio status of current service in
stereo or mono.
Signal Error Rate
– Indicates signal quality: 0-15: Good; 16-30:
Acceptable; 30 or more: Poor.
DAB
Sorting stations
By sorting stations, you can define in what order
the available stations are listed when the DAB is
tuned.
1 Press DAB MENU.
2 Push TUNE 1 / 2 (or S/T on the
remote) and press ENTER to select Station
order.
➜ 1st display line: current station order. 2nd
display line: list of options, including:
Alphanumeric (default)
– Displays all the stations in alphanumeric order.
Fav station
– Depending on the length of listening time, the
set automatically lists 10 stations you most
frequently listen to in alphanumeric order
(favorite ones in the front and others at the
back).
Active station
– Displays active/inactive stations (active ones in
the front and inactive ones at the back).
DAB
Prune stations
– Removes inactive stations from the list.
3 Push TUNE 1 / 2 (or S/T on the
remote) and press ENTER to select your
desired option.
➜ Station order is changed as specified.
➜ The last selected station continues to play.
➜ Next time you tune the DAB, the available
stations are listed in the changed order.
Dynamic range control (DRC)
With the 3 DRC value options, you can adjust
the difference in loudness according to your
listening environment:
pg001-026_MCB240_22-Eng 2005.8.1, 13:3220