Filter
Top Products
16
English
3 Press PROGRAM to confirm the track number
to be stored.
➜ P-X displays, in which X denotes the next
program number to be stored.
4 Repeat steps 2-3 to select and store all desired
tracks.
➜ PROG FULL is displayed if you attempt to
program more than 20 tracks.
5 Press STOP 9 to finish programming.
➜ PROG DONE is displayed.
6 To start playback of your disc program, press
ÉÅ directly.
Reviewing the program
In STOP mode, press and hold PROGRAM
until the display shows all your stored track
number in sequence.
Erasing the program
You can erase the program by:
● pressing STOP 9 once in the STOP mode;
● pressing STOP 9 twice during playback;
➜ PROG disappears and PROG CLR displays
briefly.
● opening the CD compartment;
CD/MP3-CD Operation
pg001-026_MCB240_22-Eng 2005.8.1, 13:3216