Philips D5 Stereo System User Manual


 
3139 115 20032
39
English
TIMER SLEEP TIMER
Sleep
(only on remote control)
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
The selections are as follows (time in
minutes):
60 45 30 15 OFF
60
"SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
minutes.
2 When you reach the desired length of
time, stop pressing the SLEEP button.
After this amount of time passes, the
system will switch to the standby
mode.
To switch off the Sleep Timer
Press SLEEP repeatedly until "OFF" is
displayed, or press the STANDBY ON
button.
5 Press CLOCK/TIMER to store the start
time.
The timer is now set.
The TIMER remains on the display.
At the preset time, the timer will be
activated.
The selected source will be played.
Notes:
During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
If the source selected is TUNER, the last
tuned frequency will be switched on.
If the source selected is CD, playback
will begin with the first track of the
selected disc or programme. If the CD
trays are empty, TUNER will be selected
instead.
To switch off the TIMER
Press TIMER on the remote control.
The timer is now switched off.
The display will show "CANCEL"
and the TIMER disappears.
To start the TIMER again
(for the same
preset time and source)
Press TIMER on the remote control.
The timer is now on.
The TIMER appears on the display.
1pg 01-42/D5/22-Eng new 9/14/00, 8:37 AM39