3139 115 20032
10
English
J AV Out Connection
Connect the AV OUT terminal at the rear of
the system to the TV or VCR VIDEO IN
terminal using the supplied scart cable for
viewing or recording.
Note:
– You can also choose to connect the
S-VIDEO OUT (Y/C) terminal or ViDEO-
OUT (CVBS) terminal at the rear of the
system to the S-VIDEO IN of the TV
using an optional S-VIDEO cable or
CVBS Cable cinch respectively.
K Audio Digital Out
Connection
You can record the digital sound from the
CD/DVD, through this output, on any audio
equipment with digital input (e.g. CD
Recorder, Digital Audio Tape (DAT) deck,
Digital to Analogue Converter and Digital
Signal Processor).
Connect one end of the cinch cable (not
supplied) to the DIGITAL OUT socket and
the other end to the audio equipment's
digital input. When connecting the cinch
cable, make sure it is fully inserted.
L AC Power Supply
After all other connections have been
made, connect the AC power cord to the
system and to the wall outlet.
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or AA)
into the remote control as shown in the
battery compartment.
• To avoid damage from possible battery
leakage, remove dead batteries or
batteries that will not be used for a long
time. For replacement, use type R06 or
AA batteries.
PREPARATION
1pg 01-42/D5/22-Eng new 9/14/00, 8:35 AM10