Philips MRD-250 Home Theater System User Manual


 
1
Connect the supplied Front speakers.
Connect the Front Right speaker to the Red/Black +/- FR (Front
Right) SPEAKER jacks on the rear of the DVD Receiver.
Connect the Front Left speaker to the White/Black +/- FL (Front
Left) SPEAKER jacks on the rear of the DVD Receiver.
2
Connect the supplied Center speaker to the Green/Black +/-
CENTER SPEAKER jacks on the rear of the DVD Receiver.
3
Connect the supplied Surround speakers.
Connect the Surround Right speaker to the Gray/Black +/- SR
(Surround Right) SPEAKER jacks on the rear of the DVD Receiver.
Connect the Surround Left speaker to the Blue/Black +/- SL
(Surround Left) SPEAKER jacks on the rear of the DVD Receiver.
4
Connect the supplied Subwoofer cable (with RCA plugs on
either end) to the WOOFER LINE OUT jack on the DVD
Receiver. Then connect the other end of the cable to the AUDIO
INPUT jack on the Subwoofer.
Connect the Subwoofer’s power cord to the Subwoofer and to
a power outlet when connections are complete. Set the Subwoofer’s
Volume/On control to On.
Use the SELECT and VOL +/-buttons on the remote to adjust
the volume level of the Subwoofer (-15dB to 10dB).
14 Hookups - Speakers
Connecting the Speakers
right
subwoofer
front
speakers
center
AUDIO
OUTPUT
left
right
left
FR
FL C SR SL
SPEAKERS (8‰)
CENTER
LINE OUT
AUDIO
OUT
AUDIO
IN
VIDEO
OUT
WOOFER
LINE OUT
TV AUX
S- VIDEO
OUT
Pr/Cr
Pb/Cb
T
COMPONENT
VIDEO OUT
COAXIAL
OPTICAL
DIGITAL
OUT
AM
FM
(75‰)
AM/FM
ANTENA
abc
.047"
(12mm)
Connecting Speaker Cable
PUSH IN
PUSH
DOWN
RELEASE
L
R
surround
speakers
Use the supplied speaker wires.
Match the color coded wiring. Connect
the +,- terminals on the Receiver (FR, FL,
etc.) to the correct +,- Speaker terminals.
1
4
2
3
mrd250book 2/14/03 10:49 AM Page 14