Filter
Top Products
17
English
MC-V320/21-1
OSD – On Screen Display
If you insert VCD/ CD/ MP3, your TV screen will
serve as an additional display for messages (e.g.
PLAY, STOP), and information stored on the
VCD.
● Press DISPLAY or OSD on the remote
control repeatedly to switch on or off the On
Screen Display.
When OSD is switched ON; you can see the
following display on the TV screen.
Below is an example of the OSD message.
– Track playtime
– Track remain playtime
– Total remain playtime
– OFF
SINGLE ELAPSED
PLAY XX/TT MM:SS
–"XX" is the current track.
–"TT" is the total tracks.
–"MM" is in minutes.
–"SS" is in seconds.
Note:
– You can also view the information from a
MP3-CD or normal CD.
Playing a Video CD with PBC
VCD with PBC (Playback Control) will be
indicated on the display of the set as soon as
they are inserted. PBC is a predefined play
sequence stored on the VCD.
1 Switch on the TV, insert a VCD with PBC and
press to start playback.
2 MENU appears on the TV screen.
If the menu consists of a list of titles, you
can select a sequence directly
● Press Digits 0/-- –9 on the remote control to
select your choice.
➜ The VCD starts playing of the selected
sequence automatically.
Note:
– If a menu consists of more than one page, press
/ to go through the pages.
Switching off PBC
● press PBC on the Remote Control.
➜ “PBC OFF” will be apears on the TV screen.
Notes:
– Programme mode is not available whenever PBC
mode is switched on.
– The menu structure depends on the information
stored on the VCD. Please refer to the information
supplied with the disc.
– Press & hold digit “0/--” will show “--” for CD &
VCD, “---” for MP3 then Press 0-9.
CD/VCD/MP3-CD Operation
Adjusting the TV System
Before viewing the Video CD, ensure that the set
is switched to corresponding PAL or NTSC
system of your TV set (except Multi–system TV).
● Press and hold VCD/ CD on
Remote Control for more than
3 seconds to switch between
PAL or NTSC TV system.
➜ After TV system is selected,
the set will automatically
switch to the last TV system setting every time
the VCD source is selected.
Note:
– Before adjusting the TV system, make sure that
there is no MP3-CD in disc tray during power up.
VIDEO CD