Filter
Top Products
16
English
MC-V320/21-1
CD/VCD/MP3-CD Operation
For VCD only
● Press or to select 4 different search
speed.
➜ "FRX1"; "FRX2"; "FRX3" or "FRX4" will be
displayed on the TV screen when you select a
fast rewind search.
➜ "FFX1"; "FFX2"; "FFX3" or "FFX4" will be
displayed on the TV screen when you select a
fast forward search.
➜ Normal playback will begin at the end of the
fast rewinding or forwarding of the selected
track.
● Play returns to normal when PLAY is
pressed or when a new track is selected.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with PROGRAM.
SHUFFLE .........tracks of the entire disc are
played in random order
SHUFFLE and REPEAT ALL…to repeat the
entire disc continuously in
random order
REPEAT ALL ... repeats the entire disc/ program
REPEAT............plays the current track
continuously
1 To select your play mode, press the MODE on
the remote control before or during playback
until the display shows the desired function.
(SHUF, REPEAT, REPEAT ALL)
2 Press to start playback if in the STOP
position.
3 To return to normal playback, press the
respective MODE button until the various
SHUFFLE / REPEAT modes are no longer
displayed.
● You can also press STOP 9 to cancel your play
mode.
Notes:
– Stop mode
(Shuffle
➝
Shuffle Repeat all
➝
Repeat all
➝
Repeat)
– Play mode
(Repeat all
➝
Repeat
➝
Play)
– Shuffle Play mode
(Shuffle
➝
Shuffle Repeat all
➝
Shuffle)
Text display and ID3 Text
This feature use to display the title and album
name for MP3-CD.
● Press DISPALY (OSD on Remote Control)
repeatedly to display the title or album name
and ID3 Text.
Notes:
– Album No, Title No. & Play time
– Title Name & Play time
– Album Name & Play time
– ID3 TEXT (Title/ Artis/ Album & play time)
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1 Load the desired discs on the disc tray.
2 Press the VCD/ CD button to select the
Source.
3 Press PROG/ REV (PROGRAM on Remote
Control) to start programming.
➜ A track number is shown and PROGRAM
will on.
4 Press or (or Digits 0/-- –9 on the remote
control) repeatedly to select the desired track.
¶ For MP3-CD, press ALBUM
--
--
-/
++
++
+ and TITLE
--
--
-/
++
++
+ to select the desired Album and Title for
programming.
5 Press PROG/ REV (PROGRAM on Remote
Control) to store the track.
¶ Repeat steps 3–5 to store other tracks.
6 Press CLOCK SET to start programme
playback.
● To end programming without starting playback,
press Ç once.
Notes:
– Programme cannot be used for VCDs when PBC
is switched on. Switch off PBC before storing tracks.
– If you attempt to programme more than 40
tracks, "MEMORY FULL" will be displayed.
Erasing the program
You can erase the program by:
● pressing STOP 9 twice during playback;
● opening the CD compartment;
➜ PROGRAM disappears from the display.
● change to other source