Philips MCD5110 Speaker System User Manual


  Open as PDF
of 30
 
20 EN
[HDMI Setup] (HDMI Setup)
When you connect this apparatus and TV with
an HDMI cable, select the best HDMI video
setting that your TV supports.
• [Resolution] (Resolution) – Select a
resolutionforhighdenitionvideos.
• [HDMI Deep Color] (HDMI Deep Color)
– Create vivid images with more color
details when the video content is recorded
in Deep Color and the TV supports this
feature.
• [Wide Screen Format] (Wide Screen
Format) – Select a display format for wide
screen videos.
• [EasyLink Setup] (EasyLink Setup) – This
unit supports Philips EasyLink which uses
the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single
remote control to control EasyLink
compliant devices that are connected
through HDMI.
• [EasyLink] (EasyLink) - Enable or
disable the EasyLink feature.
• [One Touch Play] (One Touch
Play) - After you enable this feature,
the connected HDMI CEC TV
automatically switches to the HDMI
input channel when you play a disc.
• [One Touch Standby] (One Touch
Standby) - After you enable this
feature, you can press and hold
on the remote control of this
unit to switch all connected HDMI
CEC devices to standby mode
simultaneously.
• [System Audio Control] (System
Audio Control) – When you play
audio that is routed from the
connected devices, this unit switches
to the corresponding audio source
automatically. After you enable this
feature, proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
• [Audio Input Mapping] (Audio Input
Mapping) - When you map the audio
input correctly, this unit switches to
the audio from the played device
automatically.
Note
•
You must turn on the HDMI CEC operations on the
TV/devices before you can enjoy the EasyLink controls.
See the TV/devices manual for details.
• Philips does not guarantee 100% interoperability with
all HDMI CEC compliant devices.
Audio setup
On the [Audio] (Audio) page, you can set the
following options:
[HDMI Audio] (HDMI Audio)
Select the HDMI audio setting when you connect
this product and the TV with an HDMI cable.
• [On] (On) - Allow audio output through
the TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
• [Off] (Off) - Disable audio output from
the TV. The sound is only output through
the speaker system.
[Audio Sync] (Audio Sync)
Set the delay time for audio output when you
play a video disc.
1. Press OK.
2. Press
to set the volume.
3. Press OKtoconrmandexit.
[Sound Mode] (Sound Mode)
Turn off or select your preferred sound mode.
• [Original] (Original)
• [Movie Mode] (Movie Mode)
• [Music Mode] (Music Mode)
• [Gaming] (Gaming)
• [News] (News)
 previous next