Philips MCD5110 Speaker System User Manual


 
17
English
EN
7 Listen to the
radio
Tune to a radio station
Tip
Position the antenna as far as possible from TV, VCR, or
other radiation source.
For optimal reception, fully extend and adjust the
position of the antenna.
1 Press FM to select the FM source.
2 Press and hold / ( / ) for more
than two seconds.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
• Press
/ ( / ) repeatedly until
youndtheoptimalreception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio
stations (FM).
• In tuner mode, press and hold PROG/
CLOCK SET for more than two seconds
to activate automatic programming.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength,andtherstprogrammed
radio station is broadcast automatically.
Program radio stations
manually
1 Tune to a radio station.
2 Press PROG, and then press / to
select a number from 1–20.
3 Press PROGtoconrm.
4 Repeat steps 2-3 to program more
stations.
Note
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
• In tuner mode, press / (or press a
number directly) to select a preset radio
station.