Filter
Top Products
14 EN
Option 3: Connect to Video (CVBS)
jack
1 Connect a composite video cable (yellow -
supplied) from the VIDEO OUT jack on
this unit to the video input jack on your
TV.
Note
This video connection supports video play from your
iPod.
•
Tips
The video input jack on your TV may be labeled as
A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connections provide standard picture
quality.
•
•
Option 4: Connect to RF modulator
ANT
75
1
2
3
If your TV has only a single Antenna Input jack
(labeled as 75 ohm or RF In,) you will need an
RF modulator in order to view the DVD
playback on the TV.
1 Connect a composite video cable (yellow -
supplied) from the VIDEO OUT jack on
this unit to the video input jack on RF
modulator.
2 Connect a RF coaxial cable (not supplied)
from the ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on your TV.
3 If the off-air antenna or Cable TV service
signal is connected to your TV, disconnect
it from your TV and connect it to the
ANTENNA IN or RF IN jack on the RF
modulator.
Tips
See your electronics retailer or contact Philips for
details about RF modulator availability and operations.
•