Filter
Top Products
12 EN
Connect video cables
This section describes how to connect this
Home Theater unit to your TV so to enable
viewing of disc play.
Select the best video connection that your TV
can support.
Option 1: Connect to HDMI jack (for a
HDMI, DVI or HDCP-compliant TV.)
Option 2: Connect to component video
jack (for a standard TV or Progressive Scan
TV.)
Option 3: Connect to video (CVBS) jack
(for a standard TV.)
Option 4: Connect to RF modulator (for
TV with only a single antenna input jack.)
Note
You must connect this unit directly to a TV.•
•
•
•
•
Before you connect
1 Push up the catch and remove the rear
cover.
2 Connect the cables to the corresponding
jacks and direct the cables to the open
hole on top.
3 Once complete, close the rear cover.
Note
All the cables must be placed properly inside the rear
panel in order for the rear cover to close.
•