Philips HK-1008-MCi900 2010 Stereo System User Manual


 
52 EN
(0-9) on the remote control correspond to
the locations (0-9) in the preset list.
1 Tune to your desired station.
2 On the radio play screen, press and hold
a numeric button.
If necessary, press NOW PLAYING
to return to the radio play screen.
Current station is stored to the
location.
Edit station information
1 In the FM RADIO mode, go to [Presets].
On the radio play screen, press
FAVORITE .
2 In the list of preset stations,
Select the station to be edited;
Press a/A to start editing;
Press
/ to select the entry
location; press
/ repeatedly to
select desired letters.
3 Press OK to conrm. Press BACK to
discard the changes.
Listen to FM radio
1
On MCi900, press FM RADIO on the
remote control.
Or, from Home screen, select [FM
radio].
2 Tune to your desired station (see ‘Tune to
FM radio stations’ on page 52).
To select a preset station:
Go to [FM radio] > [Presets];
Or, press the corresponding numeric
button on the radio play screen (for
the rst 10 preset stations only).
3 To mute/unmute the radio play
Press
.
9 Play FM radio
Tune to FM radio stations
Note
Before you tune to FM radio stations, ensure
that you have properly installed the supplied
FM antenna (see ‘Connect the FM antenna’ on
page 26).
Autostore
1 On MCi900, press FM RADIO on the
remote control.
Or, from Home screen, select [FM
radio].
2 In [FM radio], select [Auto store].
MCi900 starts to search for available »
stations automatically.
Radio play starts and a maximum of 60 »
stations are stored as presets when the
auto tune is complete.
The preset stations are listed in the »
order of reception strength, with the
RDS stations at the top.
3 To select a preset station, go to [Presets].
Manual tuning
1 In [FM radio], select [Manual tuning].
2 Press and hold / to start auto tuning.
You tune to the next available station »
with sufcient reception.
3 Press / repeatedly for ne tuning.
Edit preset stations
Store current station to a location
When listening to a radio station, you can
store current station to a desired location
(0-9) in the preset list. The numeric buttons