Filter
Top Products
34 EN
Get the IP address of the router
Consult the user manual of the router.•
Or, to check for the settings of the router, •
enter the IP address (e.g. 192.168.1.1) in
the web browser (e.g. Internet Explorer)
of the computer, and then, get the
desired information in the setup page.
Assign the IP address manually
On the • MCi900, enter an IP address that
allows the unit to be in the same subnet
as the router.
For example, if the router has
IP address: 192.168.1.1, Subnet mask:
255.255.255.000;
Then, enter the following on the unit:
IP address: 192.168.1.XX (where XX
denotes a number), Subnet mask:
255.255.255.000.
Acquiring IP address...
Press <Back> to enter
IP address manually
Connect to the Internet
Connect to the Internet as prompted. •
You enter Home screen after the rst- »
time setup is complete.
Note
Ensure that the router connects to the •
Internet directly and no dial-up is required on
the computer.
Wired connection: Enter IP address
manually
Stop getting Auto IP
1 Use an Ethernet cable to connect the unit
to the router.
2 On the unit, select [Wired (Ethernet)].
3 Press BACK on the remote control to
stop getting auto IP.
MCi900
Internet
MCi900