Filter
Top Products
42
English
Sound and Volume Controls
Volume control
Changing the volume level
● Rotate VOLUME clockwise / anti-clockwise (or
press VOL +/-) to increase or decrease the
volume level.
➜ “VOL XX” is displayed.
➜ “VOL MAX” is displayed at maximum level.
● Press SUBW +/- to adjust the level of the
subwoofer speaker.
➜ “SUBW XXDB” is displayed.
➜ The range is from -7dB to +8dB.
● Press REAR +/- to adjust the level of the
surround speakers volume.
➜ “REAR XXDB” is displayed.
➜ The range is from -7dB to +8dB.
● Press CENTER +/- to adjust the level of the
center speakers volume.
➜ “CNT XXDB” is displayed.
➜ The range is from -7dB to +8dB.
Note:
– The above operations are valid only if you have
5.1 speaker connection.
For PHILIPS TVs only:
● Press TV VOL +/- on the remote control to
adjust the volume of the TV.
Note:
–You can press these buttons to adjust the
speakers’ levels during tone test.
Switching off the volume temporarily
● Press MUTE.
➜ “MUTE ON” is displayed.
Press MUTE again or increase the volume level
to cancel the MUTE mode.
Listening through headphones
Connecting headphones to ; will switch off the
speakers. The system will switch STEREO and
the surround sound will be reduced to a stereo
signal which is reproducible by standard
headphones.
Disconnecting the headphones will switch on the
speakers again. If you wish to enjoy surround
sound again, switch the system back to surround
sound.