Filter
Top Products
17
English
Functional Overview
Remote control
Notes:
– First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or TUNER, for example).
– Then select the desired function (
2
,
4
,
¢
for example).
1 SOURCE
– to select the relevant active mode: TAPE, DISC,
TUNER or AUX/TV.
– TUNER: toggles between FM and MW band.
–AUX/TV: toggles between AUX-ANA and AUX-
DIG(Digital Input) mode.
2 DISC MENU (disc mode only)
– to enter or exit the disc contents menu.
3 SYSTEM MENU (disc mode only)
– to enter or exit the system menu bar.
4 3 / 4 / 1 / 2
– in Tuner mode, to select a preset radio station
number ( 1 or 2).
– to select movement direction in disc contents
menu/system menu bar.
5 4 / ¢
– in Disc mode, press to skip to the previous/next
chapter/track.
– in Disc mode, press and hold to fast reverse/
forward the disc.
– in Tuner mode, to tune to a lower or higher
radio frequency.
6 PLAY/PAUSE 2;
– to start or interrupt disc playback.
7 STOP 9
– to stop playing the disc.
8 SURROUND
– to select multichannel surround (Dolby Digital,
DTS and VSS) or stereo sound effect.
9 SOUND
– to select various sound effect: CONCERT,
DRAMA, ACTION,SCI-FI, CLASSIC, JAZZ,
ROCK, DIGITAL, WOOX 1, WOOX 2, WOOX
3 or WOOX OFF.
0 MODE
– to select the REPEAT or SHUFFLE function.
! REPEAT A-B
– to repeat a specific section on a disc.
@ POWER 2
– to switch to standby mode.
# Numeric Keypad (0-9)
– to enter a track/title number of the disc.
– to enter a number of preset radio stations.
$ VOL +/-
– adjust the volume level.
% OK
– to exit or confirm the selection.
^ RESUME
– to continue disc playback after interruption.
& MUTE
– to interrupt or resume sound reproduction.
* NIGHT (Dolby Digital mode only)
– to optimize the dynamic effect of the sound
output.
( DIM
– to select different brightness for the display.
) SLEEP
– to set the sleep (auto-off) timer function.
¡ SUBW +/-(for subwoofer connection only)
– to adjust the subwoofer’s level.
REAR +/-(for 5.1 speaker connection only)
– to adjust the rear speakers’ level.
CENTER +/-(for 5.1 speaker connection only)
– to adjust the center speaker’s level.
TV VOL+/-
– to adjust Philips’ television volume level.
1
2
3
4
7
5
6
8
9
0
!
4
(
)
*
&
^
5
$
#
@
%
¡
A-B