Filter
Top Products
24
English
Disc Operations
Notes:
– When you open the disc tray, the Repeat
function will be cancelled automatically.
–For CVD, SVCD and VCD 2.0 discs, the Repeat
function is not available unless the PBC function is
set to OFF.
– If discs of different formats are loaded, the
Repeat function is only available for the current
disc.
Shuffle play mode
In this mode, all tracks in the current directory
will be played once in a random order.
1 In stop mode, press MODE to play in a shuffle
order.
➜ Playback will start from the first disc to the
last disc.
2 Press MODE repeatedly to select the following:
SHUFFLE DISC ➜ REPEAT SHUFFLE DISC ➜
SHUFFLE ALL ➜ REPEAT SHUFFLE ALL ➜
SHUFFLE OFF
3 Press 38 to start shuffle play.
In shuffle playback mode:
● Press MODE again to display the current mode.
● Press ¢ button to select another track in a
shuffle order.
4 Press 9 to stop shuffle playback.
To cancel Shuffle mode:
● In stop mode, press MODE repeatedly to select
SHUFFLE OFF.
Notes:
– In Tuner, Tape or AUX mode, this button does not
function.
–When the disc tray is opened, the Shuffle
function will be cancelled automatically.
– In the Shuffle playback mode, the system only
supports the same disc format.
Repeating a section within a chapter/
track
You can play a specific section in a chapter/track
repeatedly.
1 Press REPEAT A-B at your chosen start point.
2 Press REPEAT A-B again at your chosen end
point.
➜ The passage will now repeat continuously.
3 To resume normal play, press REPEAT A-B
again.
Note:
– The REPEAT A-B function can only be set within
the same chapter or track.
Programing favorite tracks
You can play the contents of the disc in the
order you want. At most 99 tracks can be
stored.
1 Load the desired discs on the disc trays.
2 Press the DISC button to select the disc tray.
➜ Programming can only be done on the
selected disc.
3 While playback is stopped, press PROGRAM
to enter program mode.
➜ “P 00 : 00” is displayed.
4 Use the numeric keys (0-9) to input the track
number in the order you want.
➜ If you attempt to program more than 99
tracks, “FULL” is displayed.
5 Press OK to store the track.
● Repeat steps 3-4 to store other tracks.
6 Press 38 to play the program.
7 To stop playback, press 7 once.
8 To exit the program mode, press 7 again.
Notes:
– This function is not available for DVD or MP3
discs.
– If you open the disc tray, the program will be
cleared.
Using the menu bar to program
Favorite Track Selection (FTS) lets you play your
favorite titles/chapters or tracks/indexes in the
order you select. An FTS program can contain 99
items (titles, chapters, etc.).
IMPORTANT!
–You can only program the current
disc.
–You have to turn on your TV set and
set to the correct Video In channel. See
page 20, Setting the TV set.
1 Stop playback , then press SYSTEM MENU.
The menu bar will appear across the top of the
TV screen.