Filter
Top Products
38
English
Ta pe Operation/Recording
IMPORTANT!
– Recording is permissible if copyright
or other rights of third parties are not
infringed upon.
– Recording is possible only in tape deck
2.
Preparation for recording
1 Press TA PE (TAPE 1•2) to select TAPE 2.
2 Load a recordable tape into tape deck 2 with
the full spool to the left.
3 Prepare the source to the recorded.
DISC – load the disc(s)
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX/TV – connect external equipment.
When recording is in progress
1 Press DISC, TUNER or AUX/TV to select
the source.
● You can connect a microphone to record the
mixed sound in tape deck 2.
2 Start to play the selected source.
3 Press REC to start recording.
To stop recording
● Press 9 on the system.
Disc synchro recording
1 Press DISC to select the disc.
● Press O or P to select a desired track to
record.
● You can record programmed tracks in the order
you want.
2 Press REC to start recording.
➜ “REC” will flash, but the first 7 seconds of the
start passage will not be recorded.
Selecting another track during recording
1 Press 2; to interrupt recording.
2 Press O or P to select another track.
3 Press 2; to resume recording.
To stop recording
● Press 9.
➜ Recording and disc playback will stop
simultaneously.
Dubbing tapes
1 Load the prerecorded tape into tape deck 1.
● You can set the tape to the desired passage
where recording will start.
2 Press DUBBING.
➜ Playing and recording will start simultaneously.
➜ “DBB 000” will be displayed.
● Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A for example, flip the
tape to side B and repeat the procedure.
To stop dubbing
● Press 9.
Note:
–Press DUBBING twice for high speed dubbing,
and the audio output will be muted at the same
time.