Filter
Top Products
35
English
Tuner Operations
IMPORTANT!
– Make sure FM and MW antennas are
connected.
Tuning to radio stations
1 Press TUNER to select “FM XX” or “MW XX”.
2 Press and hold 4 / ¢ on the remote
control or 1 / ¡ on the system until the
frequency indication starts to change, then
release.
➜ The next radio station will be tuned
automatically.
➜ i lights up for FM stereo reception.
3 To tune a weak station, press 4 / ¢ on the
remote control or 1 or ¡ on the system to
auto search until a radio station with sufficient
signal strength is found.
● If you use ¡ / ™ on the system for frequency
tuning, make sure the system is in frequency
tuning mode. If not, press TUNER.
Presetting radio stations
You can store up to 40 preset radio stations in
the memory, starting from FM and followed by
MW bands.
Automatic preset programming
You can start automatic presetting from a
selected preset number.
1 Press TUNER (BAND) to select TUNER mode.
➜ The current radio frequency will appear on
the display.
To begin automatic preset from a desired
preset number
● Press O / P, 2 / 3 or numeric keys (0-
9) to select the desired preset number.
2 Press and hold PROGRAM until “AUTO”
appears on the display.
➜ PROG will start to flash.
➜ The system will start to search all radio
stations on the FM band, then MW band.
➜ All radio stations with strong signal strength
will be stored automatically.
➜ The system will stop searching when all
available radio stations are stored or when the
memory of 40 preset radio stations is full.
➜ The first preset radio station will then be
played when completed.
To stop storing the automatic preset
● Press PROGRAM or 7 on the system.
Note:
– If no preset number is selected, automatic
preset will begin from “P 01” and all your former
presets will be overridden.