Philips FW-D5D Stereo System User Manual


 
3139 116 19774
39
English
TIMER SLEEP TIMER
Sleep (only on remote control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
The selections are as follows (time
in minutes):
60 45 30 15 OFF
60
"SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
minutes.
2 When you reach the desired length
of time, stop pressing the SLEEP
button.
After this amount of time passes,
the system will switch to the
standby mode.
To switch off the Sleep Timer
Press SLEEP repeatedly until "OFF"
is displayed, or press the
STANDBY ON button.
5 Press CLOCK/TIMER to store the
start time.
The timer is now set.
The TIMER remains on the display.
At the preset time, the timer will be
activated.
The selected source will be
played.
Notes:
During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
If the source selected is TUNER, the
last tuned frequency will be switched
on.
If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD
trays are empty, TUNER will be
selected instead.
To switch off the TIMER
Press TIMER on the remote
control.
The timer is now switched off.
The display will show "CANCEL"
and the TIMER disappears.
To start the TIMER again (for the
same preset time and source)
Press TIMER on the remote
control.
The timer is now on.
The TIMER appears on the display.
pg 01-43/D5/37-Eng 7/13/00, 11:52 AM39