Philips FW-D5D Stereo System User Manual


 
3139 116 19774
10
English
PREPARATION
D Center Speaker
Connection
Connect the black (non-marked) wires
to the black CENTER terminal and the
blue (marked wires) to the blue
CENTER terminal.
E Rear Surround
Speakers Connection
Connect the black (non-marked) wires
to the black REAR SURROUND
terminals and the colored (marked)
wires to the grey REAR SURROUND
terminals.
F Subwoofer Out
Connection
Connect the optional active subwoofer
to the SUBWOOFER OUT terminal.
The subwoofer reproduces just the low
bass sound effect (e.g. explosions, the
rumble of spaceships, etc.). Be sure to
follow the instructions supplied with the
subwoofer.
C Speakers Connection
Connect the right speaker to Front
terminal R, with the colored wire to
+ and the black wire to -.
Connect the left speaker to Front
terminal L, with the colored wire to
+ and the black wire to -.
Clip the stripped portion of the
speaker wire as shown.
lock
12 mm
unlock
CAUTION:
For optimal sound performance, it is
recommended to use the supplied
speakers.
Do not connect more than one speaker
to any one pair of +/- speaker
terminals.
Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to the
SPECIFICATIONS section of this
manual.
G Wireless Surround Out
Connection
You may connect the transmitter of the
wireless rear speakers (not supplied)
to
the SURROUND OUT terminal. Be
sure to follow the instructions supplied
with the wireless surround speakers.
Note:
Availability of a wireless transmitter and
its peripherals are subjected to the
approval of local authorities. Please
check with the respective local safety
or approving authority.
H Line Out Connection
(wireless ready)
You can connect the audio left and right
LINE OUT terminals to a optional CD
Recorder's ANALOG IN terminals. This
allows you to record in an analog
format.
You can also install additional optional
front active speakers away from the
system (e.g. in another room) to reduce
the inconvenience of running long
speaker wires across rooms. You can
place as many remote speakers as you
like provided they operate at the same
radio frequency.
Connect the wireless radio frequency
transmitter to the LINE OUT terminals.
Place the active speakers at your
preferred location. Be sure to follow the
instructions supplied with the active
speakers.
I Connecting other
equipment to your
system
You can connect the audio left and right
OUT terminals of a TV, VCR, Laser Disc
player, DVD player or CD Recorder to
the AUX/CDR IN terminals at the rear
of the system.
J Video Out Connection
Connect the VIDEO OUT (CVBS)
terminal at the rear of the system to
the TV or VCR VIDEO IN terminal for
viewing or recording.
Note:
You can also choose to connect the
S-VIDEO OUT (Y/C) terminal at the
rear of the system to the S-VIDEO IN
of the TV using an optional S-VIDEO
cable.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM10