Filter
Top Products
3139 116 19774
38
English
CLOCK TIMER
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER,
etc.). The clock will be displayed for
about seven seconds.
• Press CLOCK/TIMER briefly.
™ "PM 10:38 or 22:38" (the
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
™ "--:--" will be displayed if the
clock is not set.
Note:
– When the system goes into low power
standby mode, the clock setting will not
be displayed.
Clock Setting
The clock can be set in either 12- or
24-hour mode, e.g. "AM 12:00" or
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select
clock mode.
2 Press PROG (on the system only) to
select 12- and 24- hour mode.
™ If 12-hour mode is selected,
"AM 12:00" starts flashing.
™ If 24-hour mode is selected,
"00:00" starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on
the system.
5 Press CLOCK/TIMER again to
store the setting.
™ The clock starts.
• To exit without storing the setting,
press Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD or
TUNER mode automatically at a
preset time. It can serve as an alarm
to wake you up.
• Before setting the timer, make sure
the clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum
level until the volume level
before the set is switched to
standby mode.
1 Press and hold CLOCK/TIMER for
more than two seconds to select
timer mode.
™ "AM 12:00" or "00:00" or the
last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™ The TIMER starts flashing.
™ The selected source is lit while
other available sources are
flashing.
2 Press CD or TUNER to select the
desired source.
• Before selecting CD, make sure a CD
is loaded in the CD tray.
3 Press à or á on the system to
set the hour for the timer to start.
4 Press í or ë on the system to set
the minute for the timer to start.
R
E
T
U
R
N
P
E
R
S
O
N
A
L
V
E
C
D
S
C
D
B
B
STANDBY
ON
DVD MINI HIFI SYSTEM
DIM
PROG
POWER SAVE
IR SENSOR
RDS
/
CD TEXT
NEWS
/
T.A.
CLOCK/
TIMER
VOLUME
AXIS
OK
DVD
MENU
SOUND JOG
DVD JOG
P3 P6P1 P2 P5P4
CHAP.
CHAP.
SLEEP DIM TIMERLWFM AMW
TUNER
DVD
CD
AUX
A
-
B
P
B
C
FM•AM
VCD
•
CD
CD 1
•
2
•
3
CDR
LEFT CENTER RIGHT
SURR
SURR
STOP•CLEAR
SEARCH•TUNING
PLAY PAUSE
PREV NEXTSIDE
PRESET
▲
▲
S
C
A
N
CHANNEL
DVD
SURROUND CONTROL
5.1CH / STEREO / SURR / 3D
FTS TITLE
pg 01-43/D5/37-Eng 7/13/00, 11:52 AM38