Filter
Top Products
3139 116 19774
16
English
Switching the system to
power save mode (when the
Demonstration is stopped)
• Press POWER SAVE to switch to
energy saving mode ( < 2 watts ).
™ "LOW POWER STANDBY ON" will
be displayed, after which the
display screen goes blank.
™ The low power STANDBY ON
LED will be lit.
Note:
– if the demonstration mode has not
been disabled, it will resume five
seconds later.
Selecting the Source
• Press the desired source selection
button: DVD, CD, TUNER or
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX/CDR IN terminals.
OPERATING THE SYSTEM
Dim mode
You can select the desired brightness
for the display.
• Press DIM to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
™ The DIM appears on the display.
™ "DIM 1", "DIM 2", "DIM 3" or
"DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyzer On
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
DIM 1 - normal brightness with
Spectrum Analyzer Off
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
DIM 2 - half brightness with
Spectrum Analyzer On
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
DIM 3 - half brightness with
Spectrum Analyzer Off and all LEDs
on the system will be switched off.
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
Volume Control
Adjust VOLUME to increase or
decrease the sound level.
For Personal Listening
Connect the headphones plug to the
n socket at the front of the system.
The speakers will be muted.
MUTE (on remote control only)
This feature allows you to temporarily
switch off the sound without switching
off the system when you require a
moment of silence.
1 Press MUTE on the remote control
to switch off the sound.
™ "MUTE" will be displayed.
2 Press MUTE again on the remote
control or increase the VOLUME
level to switch on the sound.
Sound Control
For Optimal sound listening, you
can only select one of the following
sound controls at a time : VEC,
PERSONAL or DSC.
VIRTUAL ENVIRONMENT
CONTROL (VEC)
The VEC feature enables you to adjust
the system to select a type of
environment.
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
VEC setting : HALL, CLUB, DISCO,
CINEMA, CONCERT or ARCADE.
™ The selected environment is
encircled.
™ "HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE" will be
displayed.
PERSONAL SOUND
You can store up to 6 personal settings.
1 Press to select the PERSONAL
feature.
2 Adjust the JOG to select the desired
Personal setting.
™ The selected personal setting
number will appear on the display.
™ If no name has been stored
previously, "PERSONAL X" will be
displayed. "X" is the setting
number.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM16